Centrifuge
ASTM D91, ASTM D96 (obs.), ASTM D893, ASTM D1290, ASTM D1796, ASTM D1966, ASTM D2273, ASTM D2709, ASTM D2711, ASTM D4007, IP 75 (obs.), IP 359
DIN 51793,
ASTM D91 - Precipitation Number of Lubricating Oils
This test method covers the determination of the precipitation number of steam cylinder stocks and black oils, and can be used for other lubricating oils.
ASTM D96 (obs.) - Water and Sediment In Crude Oil
This test method covers the centrifuge method for determining sediment and water in crude oil during field custody transfers.
ASTM D893 - Insolubles in Used Lubricating Oils
This test method covers the determination of pentane and toluene insoluble in used lubricating oils.
ASTM D1290 - Sediment in Water-emulsion Polishes
This test method covers the determination of sediment in water-emulsion polishes by means of a centrifuge.
ASTM D1796 - Water and Sediment in Fuel Oils
This test method covers the laboratory test for determination of water and sediment in fuel oils by using the centrifuge method in the range from 0 to 30 % volume.
ASTM D1966 - Foots in Raw Linseed Oil
This method covers the determination of foots in raw linseed oil by the gravimetric method.
ASTM D2273 - Trace Sediment in Lubricating Oils
This test method covers the determination of trace amounts (less than 0.05 volume %) of sediment in lubricating oils.
ASTM D2709 - Water And Sediment in Middle Distillate Fuels
This test method covers the determination of the volume of free water and sediment in middle distillate fuels having viscosities at 40°C (104°F) in the range of 1.0 to 4.1 mm/s (1.0 to 4.1 cSt) and densities in the range of 770 to 900 kg/m.
ASTM D2711 - Demulsibility Characteristics of Lubricating Oils
This test method covers the measurement of the ability of oil and water to separate from each other. It is intended for use in testing medium and high-viscosity lubricating oils.
ASTM D4007 - Water and Sediment in Crude Oil
This test method describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure.
IP 75 (obs.) - IP 359 - DIN 51793
Water and Sediment in Fuel Oils
Art. LT/CF-122000-R/M
Heated Centrifuge ASTM D96 - D4007 - D2709 - D2711
Touch screeneasy to read Rotor and adapters list on memory
Timer count up/down, from 0 or at "set RPM/RCF"
Progressive acceleration and braking selectable
Lid locking and holding and lid dropping protection
Microprocessor controlled
Program data protection through password selectable
Induction motor maintenance free
Max. speed 3.000 RPM / 2.425 RCF
Quiet: noise level low than 60 dB
15 memories + pre-heating program and Overheating protection
Power Supply
220Vac 50/60 Hz
Dimensions
54 × 65 × 40 cm
Weight
77 kg
CE marked
Alternative Products
A sentence here about related products with image links below to products you want customer to consider.
SUBMIT
Name:
This field is required.
Email:
This field is required.
Phone:
This field is required.
Industry:
This field is required.
Company Name:
This field is required.
Address:
This field is required.
Post Code:
Country:
This fi.
Centrifuge
For more information on this product or to arrange a call from one of the Cea Petrochemical Team, please complete the contact form below.
